19Jul2003
Instructions on how to install AutoDRM on a UNIX-system
-------------------------------------------------------

1) Install an account   autodrm   on your UNIX-system
(since Version 2.51, AutoDRM runs also on other accounts, but it is
recommended to install it under 'autodrm' anyway)

2) login on account autodrm

3) put the compressed tar-file autodrm_3.00beta.tar.Z into the HOME-directory
of the autodrm-account ( $HOME ).

4) $ uncompress autodrm_3.00beta.tar.Z

5) >> Note, if you have an older version of AutoDRM installed, remember, that
>> the following command will overwrite your old files unless you have saved
>> them. It is suggested, you do the following:
>> $ cd
>> $ mv prog prog_old
>> $ mv adm adm_old
>> Later you can copy your local code from this saved directories to:
>>    $HOME/prog/src (e.g. file writewaveform_local.f etc.)
>>    $HOME/adm/autodrm.rc
>>    $HOME/adm/autodrm.super
>>    $HOME/adm/autodrm.help
>> BEFORE you do so, verify if the content of the last 3 files is still
>> of the same format etc. and modify afterwards accordingly!
>> These files are the only ones that are depending on the local site.

6) $ tar xvf autodrm_3.00beta.tar

7) $ cd prog

8) $ Configure       # this command configures AutoDRM for your operating system

9) $ cd ../adm
In the adm directory:
- set the correct e-mail address for your autodrm-account and for the
autodrm-operator in file autodrm.rc (the other stuff may be modified later)
CHECK this file carefully! It is an important set-up file!
- set the super-users mail addresses in the file autodrm.super as desired
(can also be done later; this file may also be left empty).

10) Now, a preliminary version of AutoDRM should be running properly...!
Check it out by following the instruction given in file ~/prog/TEST.autodrm

11) Modify the most important *_local.f files in the prog/src directory. The
really important ones are marked with (GSE2.0) in the $HOME/prog/src/README
file.

12) >> AutoDRM is still developed further. If you would like to receive
>> information about new versions in the future, send an e-mail to
>> urs
>> and you will be notified as soon as a new version of AutoDRM is ready.

If you have any problems, please contact Urs Kradolfer:  urs